Deys Betontechniek B.V.

Giet- en ondersabelingsmortels,Betonreparatie producten, Injectieproducten, Kunststoffen, Mortelpompen, Voegovergang constructies

Deys Targets
  • Chemical-and petrochemical plants

  • Delta works

  • Harbours

  • Industry

  • Offshore

  • Powerplants

  • Department of public works

  • Railways

  • Utility

  • Airports

  • Water treatment

  • Road and water construction

  • windmills

    Windturbines

BETEC 110 HOZ / 140 HOZ / 180 HOZ

Description

BETEC 110 HOZ, 140 HOZ and 180 HOZ are so-called non- (wet) shrinking moulding mortars based on blast furnace cement which are applied in the heavy and medium-heavy industry as well as in road and hydraulic engineering.
Betec 140 HOZ is authorised for drinkwater installations
Download PDF for Information

Type Grain structure(mm) Particulars
110 hoz * 0-1 moulding mortar based on blast furnace cement
140 hoz * 0-4  
180 hoz * 0-8  
Quality control

During manufacturing only high-quality aggregates are used, which meet the strictest requirements. During the production process as well as during the final stages these materials are extensively tested for quality, not only in our own laboratory, but also in independent acknowledged institutes.

Application areas Advantages
  • Grouting of constructions with heavy static and/or dynamic load, like foundations of machines, railway constructions, concrete constructions and joint junctions
  • Fastening reinforcement bars and anchors as well as grouting holes in concrete structures
  • Injecting gain holes in columns and joints in prefab concrete structures
  • Under-water repairs
  • Products ready for use, which are easy to process and environment-friendly
  • Chromate reduced
  • Checked volume increase
  • Low generation of heat during hydration
  • No plastic shrinkage
  • Resistant to frost and gritting materials, like salt
  • High fluidity
  • Free of chlorides and other corrosive aggregates
  • Contain no aluminous cement
  • Comply with the requirements drawn up for prestressed concrete
  • Very good adhesion to concrete and steel
  • Highly resistant to oil and grease
  • Can be pumped, vibrated or poured without any danger of de-mixing
  • By adding microsilica a highly dense and homogenous mortar matrix is realised
Packaging and storage
25 kg bags – Dry and frostproof, storage life 12 months in the original and closed packaging.
Precautions
Refer to safety sheets

 

Article Code 110 HOZ 140 HOZ 180 HOZ
Kind of mortar moulding mortar moulding mortar moulding mortar
Type of Mortar [mm] 1 4 8
Moulding height [mm] 5-50 20-200 50-300
At armed constructions moulding height can change
Class of strength K50 K50 K50
Environmental degree xo t/m xa3 xo t/m xa3 xo t/m xa3
Volume increase [%] > 0.1 and < 2.0 > 0.1 and < 2.0 > 0.1 and < 2.0
Yield measurement [mm]      
 • after 5 minutes ≥,665 ≥,665 ≥,665
 • after 30 minutes ≥,570 ≥,570 ≥,570
Desiccation shrinkage after 7 days [mm/m] < 1 < 1 < 1
(measurements of shrinkage on experimental patches that received no curing)      
Water segregation (bleeding) none none none
Min. processing temp. [°C] 5 5 5
Max. processing temp. [°C] 35 35 35
Rel. humidity foundation soil moderately damp moderately damp moderately damp
Bond strength to concrete [N/mm²] > 2 > 2 > 2
Water dosage refer to front of package
Calculation of amount of dry mortar [kg/m³] 1900 1980 2090
Density of mixed mortar (kg/dm³) 2.2 2.26 2.30
Compressive strength [N/mm²] (20°C)      
 • 1 day 25.0 26.0 26.0
 • 3 days 48.0 49.0 49.0
 • 7 days 62.0 64.0 65.0
 • 28 days 82.0 85.0 91.0
 • 90 days 90.0 95.0 102.0
Flexural-tensile strength [N/mm²] (20°C)      
 • 1 day 4.5 5.0 4.0
 • 7 days 7.5 9.0 8.0
 • 28 days 9.0 11.0 10.0
 • 90 days 10.5 11.5 12.0
Complies with CUR recommendation 24

Liability

The technical instructions and recommendations we provide on the basis of our experience and to the best of our knowledge, are entirely without obligation and merely provide an indication. Not all facts, problems and queries that occur during practical application can be included in a general documentation sheet. Our recommendations and instructions do not commit us to any legal obligations as a result of the purchase and application of our products. Any deviating agreements made by our employees that are not included in our datasheets will only be lawful providing they have been confirmed in writing by the management. Our raw materials, semi-finished products and products comply with the most stringent quality standards. This does not relieve the user of their responsibility to test our products prior to their application. Our general trading and delivery conditions, which we are happy to forward to you on demand, are and remain applicable at all times.
This specification sheet supersedes any previous versions.