Deys Betontechniek B.V.

Giet- en ondersabelingsmortels,Betonreparatie producten, Injectieproducten, Kunststoffen, Mortelpompen, Voegovergang constructies

Deys Targets
  • Chemical-and petrochemical plants

  • Delta works

  • Sea Lock IJmuiden

  • Harbours

  • Industry

  • Offshore

  • Powerplants

  • Department of public works

  • Railways

  • Utility

  • Airports

  • Water treatment

  • Road and water construction

  • windmills


DEYS D 200


The DEYS D 200 is an electronically driven fully automated mortar pump which is applied for processing of high-grade shotcrete (wet-guniting system), but which can also be applied for pumping (conveying) mortars of varying consistences (plastic as well as fluid).
The D 200 is suited for mortars with a grain structure of up to 8 mm (rotor/stator type MP8).

The high-grade mixing and conveyance technology results in a continuous mixing of the dry mortar, constant water-cement ratio, constant quality of the mixture and professional application of the mortar. The robust frame of the machine has been thermo-galvanized and the filling funnel consists of stainless steel, which provides excellent protection from corrosion. Furthermore, the modular construction allows simple dismantling of the machine, so that cleaning and maintenance can be carried out without any problems.
The machine can be switched on and off by activating the spray gun in one single action or by means of the remote control.

Application areas Advantages
  • Grouts (NS-PCC/wet-guniting mortars)
  • Cement-bound mortars
  • Injecting activities
  • Self-levelling floors
  • Fire-resistant mortars
  • Thermic coats
  • Fully automated
  • Cost-reducing
  • Stainless-steel construction
  • thermo-galvanized
  • Optimum protection from corrosion
  • Little maintenance
  • Robust
  • driven by means of an electromotor
  • Good performance at low rotational speeds (200 rpm/little wear)
  • Conveyance amount can be varied by substitutable rotor/stator
  • To be switched on manually or automatically
  • Connection for dosage pump
  • Option for connection to a silo
  • Option for building in a compressor
  • Remote control (electrical, pneumatical)
  • Optimum mixing technology
Article CodeDEYS D 200
Maximum grain structure wet mixture [mm]≤, 8
Power supply380 V/50 Hz
Amperage25 A
Conveyance capacity [l/h]400-2400
Conveyance pressure [bar]max 40
Conveyance length [m]approximately 100 dependent on type of consistency)
Weight [kg]280
Size (mm) (length, width and height respectively)1750/790/1040
Conveyance, amount, length, pressure and wear are dependent upon the material (nature, consistence, structure of grain fractions, sieve line) and of the type of rotor/stator applied.
Schedule of Delivery
Gear wheel driven engine 6 kW /200 rpm
Connection for external vibrator
Connection for external dosage pump
Water pump
Rotor/stator MP4 (grains to be pumped 4 mm at the maximum)
Connection for remote control
Return circuit
Safety grill
10 m High pressure mortar hose 11/2" with two quick-couplings
2 m High pressure mortar hose 11/2" with two quick-couplings (for mixture control)
Reduction coupling 11/2" to 1"
Spray gun, x 25 mm, straight
15 m air hose 1/2"
1.5 m cleaning hose
Cleaning material
Optional fittings
Adapter for connection to silo
End-piece for funnel
Rotor/stator MP2 to MP8 (grains to be pumped 8 mm at the maximum)
MP12 conversion set
Conversion set for water system
Aspiration filter with 6 m water hose for the supplying external water (in case of malfunction or if connection to water mains is absent)
High pressure mortar hose 1" and 11/2", length: 10, 15 and 20 meter
Spray gun φ25 mm,crooked
Spray gun φ 35 mm, straight
Spray gun φ 35 mm, crooked
Air hose φ 3/8": length: 10, 15 and 20 meter
Extension piece for gun
External dosage pump
Injecting-pressure switch
Remote control
Please contact us, we will send you the information.
Please contact us, we will send you the information.


The technical instructions and recommendations we provide on the basis of our experience and to the best of our knowledge, are entirely without obligation and merely provide an indication. Not all facts, problems and queries that occur during practical application can be included in a general documentation sheet. Our recommendations and instructions do not commit us to any legal obligations as a result of the purchase and application of our products. Any deviating agreements made by our employees that are not included in our datasheets will only be lawful providing they have been confirmed in writing by the management. Our raw materials, semi-finished products and products comply with the most stringent quality standards. This does not relieve the user of their responsibility to test our products prior to their application. Our general trading and delivery conditions, which we are happy to forward to you on demand, are and remain applicable at all times.
This specification sheet supersedes any previous versions.