Deys Betontechniek B.V.

Giet- en ondersabelingsmortels,Betonreparatie producten, Injectieproducten, Kunststoffen, Mortelpompen, Voegovergang constructies

Deys Targets
  • Chemical-and petrochemical plants

  • Delta works

  • Sea Lock IJmuiden

  • Harbours

  • Industry

  • Offshore

  • Powerplants

  • Department of public works

  • Railways

  • Utility

  • Airports

  • Water treatment

  • Road and water construction

  • windmills


DEYS D 400


The Deys D 400 is a worm gear pump, which is powered by a diesel engine. The driving gear is hydraulyc, with continuously regulated rotational speed. The Deys D400 can be applied for pumping (conveying) mortars of varying consistences (plastic as well as fluid). The Deys D400 is suitable for mortars with a grainstructure up to 8 mm. This pump has a hydraulic mixer and has a regulated dosage mixer as an option.

Application areas Advantages
  • For the pumping of
  • Grouts (NS-PCC/wet-guniting mortars)
  • Cement-bound mortars (grouting/repair)
  • Injecting mortars
  • Self-levelling floors
  • Fire-resistant mortars
  • Thermic coats
  • The pump can be transported behind a passenger- or company car
  • Hydraulyc mixer
  • Continuously regulated amount to transport
  • change manual or automatic
  • Generating set is not necessary
  • Air feature through the compressor
  • Optimal mixing technique
  • Remote control
Article codeDeys D 400
Maximum grain structure wet mixture [mm]≤, 8
Drive unitDiesel engine 32 pk/4 cilinder/ watercooled
Rotational speed (minimum)13-140
Conveyance pressure [bar]max 40
Conveyance length [m]max 60
Conveyance capacity [l/h]0-3600
ContentsMixer 190 ltr/ fiiling level 90 cm
Weight [kg750
Size (mm) (length, width and height respectively)3340/1340/1110
Conveyance, amount, length, pressure and wear are dependent upon the material
Schedule of Delivery
Worm gear pump powered by a diesel engine
Compressor 500l/ min 5 bar
Return circuit
Safety grill
Hydraulyc mixer
10 metres hose NW 35
10 metres airhoseNW 19
Cleaning equipment
Spray gun
Optional fittings
High-pressure cleaner
Water meter for mixer
Spare wheel
Please contact us, we will send you the information.
Please contact us, we will send you the information.


The technical instructions and recommendations we provide on the basis of our experience and to the best of our knowledge, are entirely without obligation and merely provide an indication. Not all facts, problems and queries that occur during practical application can be included in a general documentation sheet. Our recommendations and instructions do not commit us to any legal obligations as a result of the purchase and application of our products. Any deviating agreements made by our employees that are not included in our datasheets will only be lawful providing they have been confirmed in writing by the management. Our raw materials, semi-finished products and products comply with the most stringent quality standards. This does not relieve the user of their responsibility to test our products prior to their application. Our general trading and delivery conditions, which we are happy to forward to you on demand, are and remain applicable at all times.
This specification sheet supersedes any previous versions.