BETEC 01 / 04 / 08
Description |
---|
BETEC 01, 04 and 08 are so-called non- (wet) shrinking moulding mortars based on Portland cement, favourably priced and applied for various foundations. |
Type | Grain structure [mm] | Particulars |
---|---|---|
01 | 0-1 | |
04 | 0-4 | |
08 | 0-8 |
Quality control |
---|
During manufacturing only high-quality aggregates are used, which meet the strictest requirements. During the production process as well as during the final stages these materials are extensively tested for quality, not only in our own laboratory, but also in independent acknowledged institutes. |
Application areas | Advantages |
---|---|
|
|
Packaging and storage |
---|
Bags of 25 kg. Dry and frostproof at least. Storage life 12 months. |
Precautions |
---|
Refer to safety sheets |
Article Code | 01 | 04 | 08 |
---|---|---|---|
Kind of mortar | moulding mortar | moulding mortar | moulding mortar |
Type of Mortar [mm] | 1 | 4 | 8 |
Moulding height [mm] | 5-50 | 20-200 | 50-300 |
At armed constructions moulding height can change | |||
Class of strength | K70 | K70 | K70 |
Evironmental degree | xo t/m xa3 | xo t/m xa3 | xo t/m xa3 |
Volume increase [%] | approx. 1.5 | approx. 1.5 | approx. 1.5 |
Yield measurement [mm] | |||
• after 5 minutes | ≥,550 | ≥,550 | ≥,550 |
• after 30 minutes | ≥,450 | ≥,450 | ≥,450 |
Desiccation shrinkage after 7 days [mm/m] | 0.65 | 0.60 | 0.55 |
(measurements of shrinkage on experimental patches that received no curing) | |||
Water segregation (bleeding) | none | none | none |
Min. processing temp. [°C] | 5 | 5 | 5 |
Max. processing temp. [°C] | 35 | 35 | 35 |
Rel. humidity foundation soil | moderately damp | moderately damp | moderately damp |
Bond strength to concrete [N/mm²] | > 2 | > 2 | > 2 |
Water dosage | refer to front of package | ||
Heat resistance | not inflammable up to 800 °C | ||
E-module [N/mm²] | 31000 | 33800 | 34100 |
Calculation of amount of dry mortar [kg/m³] | 1930 | 1950 | 2100 |
Density of mixed mortar [kg/dm³] | 2.20 | 2.25 | 2.27 |
MPA freeze-thaw salt report | Present | ||
Compressive strength [N/mm²] (20°C) | |||
• 1 day | 46.0 | 49.0 | 40.0 |
• 3 days | 54.0 | 62.0 | 56.0 |
• 7 days | 77.0 | 77.0 | 73.0 |
• 28 days | 95.0 | 94.0 | 89.0 |
• 90 days | 101.0 | 98.0 | 93.0 |
Flexural-tensile strength [N/mm²] (20°C) | |||
• 1 day | 5.0 | 4.5 | 5.5 |
• 3 days | 7.0 | 6.5 | 7.5 |
• 7 days | 8.5 | 8.0 | 8.5 |
• 28 days | 10.0 | 9.5 | 9.5 |
• 90 days | 11.0 | 10.5 | 10.5 |
Safety sheets |
---|
Download: SD23313 - BETEC 01 - EN |
Download: SD23369 - BETEC 04 - EN |
Download: SD23315 - BETEC 08 - EN |
Certificates: EC 1504-06 |
---|
Download: NDoP_Betec 01 1504-6_DEYS-110186-03-EN |
Download: NDoP_Betec 08 1504-6_DEYS-92969-03-EN |
Liability
The technical instructions and recommendations we provide on the basis of our experience and to the best of our knowledge, are entirely without obligation and merely provide an indication. Not all facts, problems and queries that occur during practical application can be included in a general documentation sheet. Our recommendations and instructions do not commit us to any legal obligations as a result of the purchase and application of our products. Any deviating agreements made by our employees that are not included in our datasheets will only be lawful providing they have been confirmed in writing by the management. Our raw materials, semi-finished products and products comply with the most stringent quality standards. This does not relieve the user of their responsibility to test our products prior to their application. Our general trading and delivery conditions, which we are happy to forward to you on demand, are and remain applicable at all times.
This specification sheet supersedes any previous versions.