BETOCHEM 332 RAPID
Description |
---|
Betochem 332 rapid is a almost odorless very fast hardening two-component epoxy resin mortar based on methylacrylates (Puma). |
Quality control |
---|
During manufacturing only raw materials of high quality are used which amply meet the strictest requirements. During the production process as well as during the final stages these materials are extensively tested for quality in our own laboratory. |
Application areas |
---|
Betochem 332 RAPID is perfectly made for quick repairs of industrial floors, heavy loaded trafic areas, airfields and landing strips, cold stores. Perfect compo and anchor for piles and applications till -10 gr C. |
Packaging and storage |
---|
10 or 25 kg – In the original properly closed packaging in a cool dry place, frost free minimum storage life 2 years. |
Precautions |
---|
Refer to the information on the packaging of the product, safety sheets and processing advice C. |
Application |
---|
By means of moulding, trowel, skimmer. Tools can be cleaned with betochem brush dilutant EP. |
Ground |
---|
Concrete cement-bound, stone-like and metal grounds. The ground should be clean, dry and free of dust, grease and dirt and furthermore should meet the terms and conditions that normally apply. Roughen the ground by means of blasting or bush hammering when the ground is dense. Free metal grounds of corrosion products and a primer should be applied if so required. |
Resistance to chemicals |
---|
Refer to list of resistance to chemicals. |
Article code | 332 rapid |
---|---|
Colour | Light grey |
Density [kg/dm³](20°C) | 2.10-2.15 |
Amount to be used (kg/m²)(at 1 cm thickness of layer) | 21 |
• Thickness of layer * | 3 cm per layer* |
Solid content (percentage by volume) | 100 |
Mixing ratio (by part of weight) | |
• Component A | 2 (5) |
• Component B | 8 (20) |
Potlife (20°C) | 10 minutes |
Processing temperature [°C] | -10 till 35 |
Ground temperature | > 0ºC |
Loadable | after approx 0,5 hour |
Compressive strength [N/mm²] | |
• after 3 hours | approx 60 |
• after 24 hours | approx 80 |
Flexural-tensile strength [N/mm²](20°C) | 26.5 |
E-module [N/mm²] | 6900 |
Shear strength [N/mm²] | 5 |
Bond strength to concrete [N/mm²] | > 2 N/mm² |
Safety sheets |
---|
Download: BETOCHEM 332 SAFETY (Component A)_V1_ENG |
Download: BETOCHEM 332 SAFETY (Component B)_V4 |
Download: Betochem Cleaner EN |
Please contact us, we will send you the information. |
Liability
The technical instructions and recommendations we provide on the basis of our experience and to the best of our knowledge, are entirely without obligation and merely provide an indication. Not all facts, problems and queries that occur during practical application can be included in a general documentation sheet. Our recommendations and instructions do not commit us to any legal obligations as a result of the purchase and application of our products. Any deviating agreements made by our employees that are not included in our datasheets will only be lawful providing they have been confirmed in writing by the management. Our raw materials, semi-finished products and products comply with the most stringent quality standards. This does not relieve the user of their responsibility to test our products prior to their application. Our general trading and delivery conditions, which we are happy to forward to you on demand, are and remain applicable at all times.
This specification sheet supersedes any previous versions.