Deys Betontechniek Nederland BV
Gelreweg 5, 3843 AN Harderwijk
Postbus 330, 3840 AH Harderwijk
http://www.deys.nl

Telephone +31 (0)341 41 51 48
(24 hr / day)
Fax (0341) 42 54 90
info@deys.nl

BETEC 600 MULTIFLOW 0-5 R

Description
BETEC MULTIFLOW 600 0-5 R is a so-called non- (wet) shrinking moulding mortars based on Portland cement which are applied in the heavy and medium-heavy industry as well as in road and hydraulic engineering .

Type	Grain structure
600	0 – 5

Quality control
During manufacturing only high-quality aggregates are used, which meet the strictest requirements. During the production process as well as during the final stages these materials are extensively tested for quality, not only in our own laboratory, but also in independent acknowledged institutes.

Application areas	Advantages
Grouting of big constructions with heavy static and/or dynamic load, like foundations of machines, railway constructions, concrete constructions and joint junctions Fastening reinforcement bars and anchors as well as grouting holes in concrete structures Injecting gain holes in columns and joints in prefab concrete structures	Products ready for use, which are easy to process and environment-friendly Chromate reduced Checked volume increase No plastic shrinkage/ very low hydratation heat development Extremely fluid Very high early and final strengths Resistant to frost and gritting materials, like salt Minimal desiccation shrinkage Free of chlorides and other corrosive aggregates Contain no aluminous cement Thickness of layer 20 – 600 mm ! Can be pumped, vibrated or poured without any danger of de-mixing

Application areas

Advantages

Grouting of big constructions with heavy static and/or dynamic load, like foundations of machines, railway constructions, concrete constructions and joint junctions
Fastening reinforcement bars and anchors as well as grouting holes in concrete structures
Injecting gain holes in columns and joints in prefab concrete structures

Products ready for use, which are easy to process and environment-friendly
Chromate reduced
Checked volume increase
No plastic shrinkage/ very low hydratation heat development
Extremely fluid
Very high early and final strengths
Resistant to frost and gritting materials, like salt
Minimal desiccation shrinkage
Free of chlorides and other corrosive aggregates
Contain no aluminous cement
Thickness of layer 20 – 600 mm !
Can be pumped, vibrated or poured without any danger of de-mixing

Packaging and storage
25 kg bags. Dry and frostproof, storage life 12 months in the original and closed packaging.

Precautions
Refer to safety data sheets

Article number	Multiflow 600
Kind of mortar	Grouting mortar
Type of mortar (mm)	5
Thickness of layer (mm)	20-600
Class of strength	K70
Environmental degree	x0 t/m xa3
Water penetration (mm)	< 10
Resistance tof rost and gritting materials (salt)	< 0.4
Carbonatation depth (91 days) (mm)	< 2
Halogen content (%)	< 0.05
Thermic expansion coefficient (ºC)	< 15 x 10-6
Polymer	irrelevant
Volume increase [%]	> 0.1 and

Yield measurement [mm]
• after 5 minutes	> 680
Desiccation shrinkage	0.23
(measument of shrinkage in experimental patches that received no curing)
Water segregation (bleeding)	none
Min. Processing temperature [°C]*	5
Max. Processing temperature [°C]	35
Relative humidity foundation soil	Moderately damp
Bond strenght to concrete [N/mm²]	> 2
Water dosage	Refer to front of package
Air content [%]	approx 5.0
E-module [N/mm²]	32000
Calculation of amount of dry mortar [kg/m³]	2,0
Density of mixed mortar [kg/dm³]	2.3

Compressive strength [N/mm²] (20°C)
• 4 hours	27
• 1 day	38
• 7 days	73
• 28 days	80
Flexural-tensile strength [N/mm²] (°C)
• 1 day	6
• 7 days	8
• 28 days	10

Complies with CUR recommendation 24 and 54 **At temperatures below 5 ºC measures for winter conditions must be taken (material applicable till -5ºC) Processing time max. 30-45 minutes

Liability

The technical instructions and recommendations we provide on the basis of our experience and to the best of our knowledge, are entirely without obligation and merely provide an indication. Not all facts, problems and queries that occur during practical application can be included in a general documentation sheet. Our recommendations and instructions do not commit us to any legal obligations as a result of the purchase and application of our products. Any deviating agreements made by our employees that are not included in our datasheets will only be lawful providing they have been confirmed in writing by the management. Our raw materials, semi-finished products and products comply with the most stringent quality standards. This does not relieve the user of their responsibility to test our products prior to their application. Our general trading and delivery conditions, which we are happy to forward to you on demand, are and remain applicable at all times.
This specification sheet supersedes any previous versions.