Deys Betontechniek Nederland BV Gelreweg 5, 3843 AN Harderwijk Postbus 330, 3840 AH Harderwijk http://www.deys.nl Telephone +31 (0)341 41 51 48 (24 hr / day) Fax (0341) 42 54 90 info@deys.nl |
Description |
---|
The D 50 is an electronic and continuously driven pump which is applied for pumping (conveyance) of mortars with plastic or fluid consistences. Innovation and endurance are not opposites. Both of these qualities caracterise this compact pump, designed for spraying, pumping, injection of liquid and pasta-like compounds. |
Application areas | Advantages |
---|---|
|
|
Article Code | DEYS D 50 |
---|---|
Type of engine | gear wheel driven |
Maximum grain structure wet mixture [mm] | 2 (maximum) |
Drive unit | electromotor 1.5 kW |
Power supply | 220 V/50 Hz |
Amperage | 16 A |
Conveyance capacity [l/h] | 70-570 (dependent upon which rotor + strator) |
Rotational speed | 7-40 |
Conveyance pressure [bar] | max 25 |
Conveyance length [m] | approximately 35 (dependent upon consistence and nature of material * |
Dimensions LxWxH | 75x34x43 cm |
Weight [kg] | 33 |
Notice | |
Conveyance, amount, length, pressure and wear are dependent upon the material (nature, consistence, structure of grain fractions, sieve line) and of the type of rotor/stator applied. |
Schedule of Delivery |
---|
Gear wheel driven engine 1.5 kW / 7 40 rpm |
Rotor/stator MP 24 (yield approximately 90- 570 litres an hour) |
Connection for remote control |
10 m High pressure mortar hose Ø 25 mm with two rapid-action cou |
Tools |
Cleaning equipment |
Optional fittings |
---|
Air hose 1/2 " |
High-pressure grouting hose 3/4 and 1' |
Stator/rotor MP10, MP24 (casing set included) |
Remote control |
The technical instructions and recommendations we provide on the basis of our experience and to the best of our knowledge, are entirely without obligation and merely provide an indication. Not all facts, problems and queries that occur during practical application can be included in a general documentation sheet. Our recommendations and instructions do not commit us to any legal obligations as a result of the purchase and application of our products. Any deviating agreements made by our employees that are not included in our datasheets will only be lawful providing they have been confirmed in writing by the management. Our raw materials, semi-finished products and products comply with the most stringent quality standards. This does not relieve the user of their responsibility to test our products prior to their application. Our general trading and delivery conditions, which we are happy to forward to you on demand, are and remain applicable at all times.
This specification sheet supersedes any previous versions.