Deys Betontechniek Nederland BV
Gelreweg 5, 3843 AN Harderwijk
Postbus 330, 3840 AH Harderwijk
http://www.deys.nl

Telephone +31 (0)341 41 51 48
(24 hr / day)
Fax (0341) 42 54 90
info@deys.nl

BETOCHEM 2504 / 2514

Description

BETOCHEM 2504 is a free of solvents two-component injecting resin based on polyurethaan, which expands under influence of moist. BETOCHEM 2504 has a medium viscosity en has a quick reaction with water. BETOCHEM 2504 is easy to process.

Quality control

During manufacturing only raw materials of high quality are used which amply meet the strictest requirements. During the production process as well as during the final stages these materials are extensively tested for quality in our own laboratory.

Packaging and storage
1 and 5 kg. In the original properly closed packaging in a cool dry place, frost free minimum storage life 6 months.
Precautions
Refer to the information on the packaging of the product, safety sheets and processing advice C.
Application
By means of airless or manual injecting equipment. Tools can be cleaned with BETOCHEM brush/spray dilutant EP.
Ground
Concrete and other cement-bound grounds. The ground should be clean, dry or moist and free of dust, grease and dirt and furthermore should meet the terms and conditions which generally apply.
Resistance to chemicals
Refer to list of resistance to chemicals.
Article code2504
Colourcolourless
Density [kg/dm³](20°C)1.13
Amount to be used (kg/m²)(0.3 mm thickness of layer)1.1
(dependent on ground and method of application) 
Thickness of layer [mm]0.5-5.0
Solid content (percentage by volume)100
Viscosity (mPa.s)(25°C)approx. 300
Flash point [°C](DIN 53213> 65
Processing temperature [°C]5-30
Drying/full-hardening (20°C/65% RH/1 mm thickness of layer)after 24 hours 70% of the final strength is realised - full final strength is realised after approx. 7 days.
Reactivity with water (min) (20°C) 
Depending on the accelerator: 
dosage 1%42 sec. gel
 130 sec. solid
dosage 5%12 sec. gel
 40 sec. solid

Liability

The technical instructions and recommendations we provide on the basis of our experience and to the best of our knowledge, are entirely without obligation and merely provide an indication. Not all facts, problems and queries that occur during practical application can be included in a general documentation sheet. Our recommendations and instructions do not commit us to any legal obligations as a result of the purchase and application of our products. Any deviating agreements made by our employees that are not included in our datasheets will only be lawful providing they have been confirmed in writing by the management. Our raw materials, semi-finished products and products comply with the most stringent quality standards. This does not relieve the user of their responsibility to test our products prior to their application. Our general trading and delivery conditions, which we are happy to forward to you on demand, are and remain applicable at all times.
This specification sheet supersedes any previous versions.