Deys Betontechniek B.V.

Giet- en ondersabelingsmortels,Betonreparatie producten, Injectieproducten, Kunststoffen, Mortelpompen, Voegovergang constructies

Deys Targets
  • Chemical-and petrochemical plants

  • Delta works

  • Sea Lock IJmuiden

  • Harbours

  • Industry

  • Offshore

  • Powerplants

  • Department of public works

  • Railways

  • Utility

  • Airports

  • Water treatment

  • Road and water construction

  • windmills

    Windturbines

BETOCHEM 2000

Description

BETOCHEM 2000 is a two-component coating based on epoxy free of solvents; it is resistant to water, cleaning agents, various kinds of oil, grease and chemical substances. BETOCHEM 2000 is easy to process and impact-, shock- and wear-resistant.

Quality control

During manufacturing only raw materials of high quality are used which amply meet the strictest requirements. During the production process as well as during the final stages these materials are extensively tested for quality in our own laboratory.

Application areas
  • As coating in systems for floors in storage rooms, garages, galleries and balconies
  • For the protection of steel, mineral and wooden grounds which are subject to wear and erosion
Packaging and storage
3, 6 en 12 kg kg. In the original properly closed packaging in a cool dry place, frost free minimum storage life 6 months.
Precautions
Refer to the information on the packaging of the product, safety sheets and processing advice C.
Application
By means of a brush or paint roller. Tools can be cleaned with BETOCHEM brush dilutant EP.
Ground
Concrete and other cement-bound and stone-like grounds. The ground should be clean, dry and free of dust, grease and dirt and furthermore should meet the terms and conditions which generally apply.A steel ground should be free of rust so that a suitable rust-preventing primer can be provided if necessary.
Resistance to chemicals
Refer to list of resistance to chemicals.
Article Code2000
ColourRAL colours
Appearanceshiny
Density [kg/dm³](20°C)1.7
Amount to be used (g/dm3)(at 300µm thickness of layer)510
Thickness of layer [um]300
Solid content (percentage by volume)100
Mixing ratio (by part of weight) 
 • Component A83.5
 • Component B16.5
Flash point [°C](DIN 53213) 
 • Component A> 65
 • Component B> 65
Potlife [min] (20°C)approx. 35
Processing temperature [°C]20
Drying/full-hardening [h] (20°C/65% RH/ 300µm thickness of layer) 
 • dust-dryafter approx. 6 hours
 • repaintableafter approx. 16 hours
 • ready to be walked onafter approx. 16 hours

(in system building or with several layers, a maximum drying time between layers of 24 hours applies, unless a pre-treatment of the surface has occurred)

BETOCHEM 2000
BETOCHEM 500 (impregnating substance)Remark
BETOCHEM 2000If so desired, spray in this layer with quartzite
BETOCHEM 2000
Please contact us, we will send you the information.

Liability

The technical instructions and recommendations we provide on the basis of our experience and to the best of our knowledge, are entirely without obligation and merely provide an indication. Not all facts, problems and queries that occur during practical application can be included in a general documentation sheet. Our recommendations and instructions do not commit us to any legal obligations as a result of the purchase and application of our products. Any deviating agreements made by our employees that are not included in our datasheets will only be lawful providing they have been confirmed in writing by the management. Our raw materials, semi-finished products and products comply with the most stringent quality standards. This does not relieve the user of their responsibility to test our products prior to their application. Our general trading and delivery conditions, which we are happy to forward to you on demand, are and remain applicable at all times.
This specification sheet supersedes any previous versions.