Deys Betontechniek Nederland BV Gelreweg 5, 3843 AN Harderwijk Postbus 330, 3840 AH Harderwijk http://www.deys.nl Telephone +31 (0)341 41 51 48 (24 hr / day) Fax (0341) 42 54 90 info@deys.nl |
Description |
---|
BETEC 300 HOZ is a non- (wet) shrinking synthetic modified (PCC) cosmetic repair mortar with synthetic fibres based on blastfurnace cement, applied for cosmetic repairs. BETEC 300 HOZ can also be supplied in the colours lightgrey and darkgrey |
Type | Grain structure (mm) | |
---|---|---|
300 HOZ | < 0 – 0,15 |
Quality control |
---|
During manufacturing only high-quality aggregates are used, which meet the strictest requirements. During the production process as well as during the final stages these materials are extensively tested for quality, not only in our own laboratory, but also in independent acknowledged institutes. |
Application areas | Advantages |
---|---|
|
|
Packaging and storage |
---|
20 kg bags. Dry and frostproof, storage life 12 months in the original and closed packaging. |
Precautions |
---|
Refer to safety sheets |
Article code | 300 HOZ |
---|---|
Kind of mortar | Trowel mortar |
Type of mortar [mm] | 0,15 |
Thickness of layer [mm] | 1-5 mm |
Class of strength | K30 |
Environmental degree | xa3 |
Application class | R2 |
Volume increase (%) | >0,1 en |
Desiccation after90 days [ mm/m] | < 1,2 |
(measurement of shrinkage on experimental patches tha received no curing) | |
Water penetration (mm) | < 10 |
Resistance tof rost and gritting materials (salt) | < 0,4 |
Carbonatation depth (91 days) (mm) | < 2 |
Halogen content (%) | < 0,05 |
Thermic expansion coefficient (ºC) | < 15x10-6 |
Polymer | Resistant to alkaline |
Processing time (minutes) (at 20ºC) | Approx. 15 |
Water segregation (bleeding) | None |
Minimum processing temperature (ºC) | 5 |
Maximum processing temperature (ºC) | 35 |
Relative humidity foundation soil | Moderately damp |
Bond strength to concrete (N/mm²) | > 0,8 |
E-module (N/mm²) | 10.100 |
Air content (%) | < 10,0 |
Water dosage | Refer to front of package |
Polymer content (%) (m/m) | < 20 |
Calculation of amount of dry mortar (kg/m³) | 1.49 |
Density of mixed mortar (kg/m³) | 1.80 |
Compressive strength [N/mm²] (20°C) | |
1 day | 10.0 |
2 days | 15.0 |
28 days | 29.0 |
90 days | 30.0 |
Flexural-tensile strength [N/mm²] (°C) | |
2 days | 3.5 |
7 days | 5.0 |
28 days | 7.0 |
Complies with CUR recommendation 54
The technical instructions and recommendations we provide on the basis of our experience and to the best of our knowledge, are entirely without obligation and merely provide an indication. Not all facts, problems and queries that occur during practical application can be included in a general documentation sheet. Our recommendations and instructions do not commit us to any legal obligations as a result of the purchase and application of our products. Any deviating agreements made by our employees that are not included in our datasheets will only be lawful providing they have been confirmed in writing by the management. Our raw materials, semi-finished products and products comply with the most stringent quality standards. This does not relieve the user of their responsibility to test our products prior to their application. Our general trading and delivery conditions, which we are happy to forward to you on demand, are and remain applicable at all times.
This specification sheet supersedes any previous versions.