BETEC 09
| Description |
|---|
BETEC 09 is a so-called non- (wet) shrinking drypack mortar based on Portland cement which are applied for constructions with heavy static and/or dynamic load. |
| Type | Grain Structure (mm) | |
|---|---|---|
| 09 | 0-2 | |
| Quality control |
|---|
During manufacturing only high-quality aggregates are used, which meet the strictest requirements. During the production process as well as during the final stages these materials are extensively tested for quality, not only in our own laboratory, but also in independent acknowledged institutes. |
| Application areas | Advantages |
|---|---|
|
|
| Packaging and storage |
|---|
| 25 kg bags. Dry and frostproof, storage life 12 months in the original and closed packaging. |
| Precautions |
|---|
| Refer to safety sheets |
| Article Code | 09 | |
|---|---|---|
| Kind of mortar | grouting mortar | |
| Type of mortar [mm] | 2 | |
| Thickness of layer [mm] | 10-60 | |
| Class of strength | K50 | |
| Environmental degree | xo t/m xa3 | |
| Volume increase [%] | > 0.1 en < 2.0 | |
| Desiccation shrinkage after 7 days [mm/m] | 0.51 | |
| (measurement of shrinkage on experimental patches that received no curing) | ||
| Water segregation (bleeding) | none | |
| Min. processing temperature [°C] | 5 | |
| Max. processing temperature [°C] | 35 | |
| Relative humidity foundation soil | moderately damp | |
| Bond strength to concrete [N/mm²] | >2 | |
| Water dosage | refer to front of package | |
| Calculation of amount of dry mortar [kg/m³] | 2020 | |
| Density of mixed mortar(kg/dm³) | 2.27 | |
| Compressive strength [N/mm²](20°C) | ||
| • 1 day | 30.0 | |
| • 3 days | 45.0 | |
| • 7 days | 56.0 | |
| • 28 days | 65.0 | |
| • 90 days | ||
| Flexural-tensile strength [N/mm²] (20°C) | ||
| • 1 day | 4.0 | |
| • 7 days | 5.0 | |
| • 28 days | 6.5 | |
| • 90 days | 7.0 | |
Complies with CUR recommendation 24
| Safety sheets |
|---|
| Download: SD23314 - BETEC 09 - EN |
| Certificates: EC 1504-03 |
|---|
| Download: NDoP_Betec 09 Deys 1504-3_DEYS-47314-03-EN |
Liability
The technical instructions and recommendations we provide on the basis of our experience and to the best of our knowledge, are entirely without obligation and merely provide an indication. Not all facts, problems and queries that occur during practical application can be included in a general documentation sheet. Our recommendations and instructions do not commit us to any legal obligations as a result of the purchase and application of our products. Any deviating agreements made by our employees that are not included in our datasheets will only be lawful providing they have been confirmed in writing by the management. Our raw materials, semi-finished products and products comply with the most stringent quality standards. This does not relieve the user of their responsibility to test our products prior to their application. Our general trading and delivery conditions, which we are happy to forward to you on demand, are and remain applicable at all times.
This specification sheet supersedes any previous versions.
